• CP-ST-002,MY SHOP,CP-ST-002
  • CP-ST-002,MY SHOP,CP-ST-002

CP-ST-002 stone-look facade panel in white marble finish

Stone-look facade panels with a white marble face on inorganic fibre board for exterior cladding and interior walls. Direct from the factory.
  • CP-ST-002,MY SHOP,CP-ST-002

Description

Product Overview

Stone facade panels in the CERSAIPANEL range are large-format inorganic fibre boards with a stone surface, made for exterior wall cladding and for interior walls. CP-ST-002 is the white marble face of that range: a pale ground with soft grey veining and a polished sheen, so a finished elevation reads as cut stone rather than as a coated board.

The board itself is made from coal gasification slag, an industrial by-product, melted and restructured at high temperature into a fully inorganic, glass-phase panel. It arrives flat, is worked on site like any other board, and is fixed to a prepared substrate according to the system design for the wall.

Most enquiries come from façade contractors and fabricators pricing an elevation, project owners and developers weighing a stone look against slab stone, architects fixing the finish for an entrance or reception wall, and importers and exterior wall cladding panels suppliers who want a stone-look line they can stock locally.

Stone Look & Advantages

  • A pale white marble ground with soft grey veining and a polished sheen — the finish we supply on stone facade panels exterior walls and on interior faces.
  • A manufactured stone look rather than quarry stone or fired tile. The pattern is produced to an approved sample, so there is no slab to select and no vein surprise between the sample and the production run.
  • Large format: stone facade panels for exterior wall fields are covered with far fewer pieces and joints than tile or small-format cladding.
  • Lighter than the materials it usually replaces. The board is offered as a lighter alternative to stone, ceramic tile and several traditional panel systems, which matters where cladding weight would otherwise feed back into the supporting structure.
  • Board work, not slab work. Panels are cut, drilled, nailed and screwed with ordinary fabrication equipment instead of stone-cutting tools.
  • A quieter wall. Because the surface is panelled rather than tiled, it reads as one continuous stone face with designed joints instead of a grid of grout lines.

Material & Build

The board behind the stone surface is inorganic from edge to edge. Its raw material is coal gasification slag, a solid by-product of industrial gas production that used to be stockpiled as waste. We melt it twice at 1,500 °C and restructure it into a fully glass-phase fibre board, burning out the harmful constituents of the raw material and leaving clean mineral components behind. Chemically it behaves like the mineral boards already used in construction, with slag standing in for quarried rock, and the melting process runs on wind and solar electricity.

The finished panel is formaldehyde-free and benzene-free, and our test documentation reports no toxic volatile organic compounds. It is not a carbon-fibre composite: fibre board here describes the vitreous mineral fibres formed during melting, not carbon reinforcement. Alongside fire and mould testing, the range is supported by antiviral activity, radioactivity, VOC and scrapped-off toy material testing.

The decorative face is applied after the board is formed, and we produce it at our own exterior wall panels factory in Yulin, Shaanxi, so the surface and the panel behind it are made as one product rather than assembled from separate suppliers. The face is resistant to staining, scratching and wear, and the board is fabricated on site with normal tooling.

Specifications

Specification Detail
Product Inorganic fibre decorative board, stone-look series
Surface finish White marble look with soft grey veining, polished
Panel length Up to 3,050 mm
Panel width Up to 1,220 mm
Panel thickness 4–15 mm across the product series
Apparent density Approximately 950–1,200 kg/m³, depending on series
Moisture expansion 0.1% or less
Formaldehyde and benzene Not detected
Toxic volatile organic compounds None detected
Screw withdrawal strength 1,870 N or more, as reported for the range
Fixing methods Wet bonding, riveting or dry hanging
On-site fabrication Cutting, drilling, nailing, screwing

Thickness, Format & Wall Conditions

  1. Confirm which face the panel goes on — stone facade panels exterior and interior are supplied in this range. Exterior wall cladding normally uses the 10 mm and 12 mm tiers; interior walls use the 4 mm, 6 mm, 8 mm and 10 mm tiers, and the series as a whole runs from 4 mm to 15 mm.
  2. Measure the finished wall rather than the drawing. Net openings, returns, parapet upstands and the joint width all take millimetres off the panel size.
  3. Set the panel size to site access as well as to the elevation. The largest piece that can be delivered to the floor, passed through a window or reached from a cradle usually decides the format.
  4. Agree the joint detail early, because joint width, the shadow gap or sealant line, and the way the panel returns at a corner or a window reveal, set the look of the finished wall.
  5. Check the substrate. The boards are fixed to a prepared substrate or support system, so the wall behind them has to be sound, level and dry enough for the approved method; on an uneven wall, the framing or levelling layer that carries the panels is part of the specification.
  6. Check fire performance against the assembly, not the panel alone. The board is tested for fire performance and the tested wall build-up is reported at 90 minutes at 1,200 °C, but the result depends on panel thickness, substructure, joints and fixing — verify it against the project's fire report and local code before the design is fixed.
  7. Make sure the walls being compared are the same wall. When several exterior wall cladding panels suppliers are working on one elevation, panel thickness, fixing method, joint detail and substrate preparation need to be specified identically, because those four items decide whether two systems are really comparable.

Applications

  • Façades and wall fields on commercial buildings, high-end residential developments and municipal projects, where the design wants a marble face carried across a large elevation.
  • Entrance zones, recessed entrances and canopy soffits, where the stone face is seen at close range and the joint rhythm is part of the design.
  • Lift lobbies, reception walls and interior feature walls that continue the outside finish indoors.
  • Corridors and public areas in schools, hospitals and transport buildings, where a hard-wearing wall surface is part of the brief.
  • Bathroom, kitchen and balcony walls, which are allowed for on both boards and joints that are detailed properly.
  • Industrial buildings, rail facilities and ship interiors, which appear in the same application list as the commercial and civic projects above.

Stone-Look Range & Related Panels

Model or band Surface Notes
CP-ST-002 White marble look, soft grey veining, polished The model on this product, for exterior and interior walls
CP-ST-001 to CP-ST-032 Further stone looks — marble, granite and textured stone Stone-look band, other surfaces on the same board construction
CP-ST-005, CP-ST-020, CP-ST-027, CP-ST-031, CP-ST-032 Other stone surfaces in the band Commonly specified alongside this one; ask for them together
CP-MT-001 to CP-MT-006 Metal looks — brushed and coated surfaces Metal-look band, exterior and interior walls
CP-WO-001 to CP-WO-017 Wood looks — timber grain surfaces Wood-look band, exterior and interior walls
TAL and SAL codes Solid aluminium mosaic tile Decorative interior feature walls
Surface production High-definition 3D printing, electron-beam cured Stone, metal and wood looks, plus custom patterns

Ordering & Delivery

  1. Start with the application: stone facade panels for exterior façades, interior walls, wet areas, or a mix of all three.
  2. Give the panel size and thickness you have in mind, or send the elevation drawings and let us work the sizes through with you.
  3. State the finish and the reference — the stone look you are matching, and the sample or photograph the design team has approved.
  4. Include the quantity in panels or square metres, the project location and the delivery date you are working to.
  5. Tell us the fixing method if the system design already sets it, so the quotation covers the same scope throughout.
  6. Quotations come from the exterior wall panels factory that makes the board, so technical questions about thickness, surface and fixing go straight to the people producing the panels.
  7. Production runs on a standard window: custom orders: 30 days from confirmation, and the timetable for your specification is confirmed when you place the order.
  8. Tell us what the project reviewer needs. The test documents that apply to your specification, the minimum order quantity and the packing for your destination are all confirmed with your sales contact at quotation.
  9. If you want to see the surface before committing, ask your sales contact about sample availability.

Finish Matching & Surface Care

  • The white marble face is produced to the sample your design team approves, and that reference is what a later call-off is matched to. Quote the approved reference together with the panel size, thickness and fixing method when you place a repeat order, so the run is set up in one pass.
  • Phasing works when it follows the architecture. Ask production to hold one run for the field that has to read as a single piece of stone — a full elevation, a bay between columns, or a floor band — and divide the delivery along those lines rather than by equal tonnage.
  • Where two runs have to meet, put the meeting point where the design already breaks: a mullion, a column, a window reveal, a change of plane or a designed shadow gap. A joint that belongs to the composition carries a small tone shift; a joint dropped into the middle of a blank field does not.
  • If a delivery does arrive in more than one run, spread panels from both runs across the field instead of fixing them block by block, and check the run marking on the packs against the delivery note before the installer opens them.
  • Keep two or three panels from each run in store. A repair panel taken from the same run is the only way to replace a damaged piece without it standing out on the wall.
  • For routine care, take dust and grit off first with a soft brush or a dry cloth, then wash with water and a mild neutral detergent, working from the top of the wall down and rinsing as you go. On stone facade panels used outside, this is the whole maintenance routine for the face.
  • Keep abrasive pads, scouring powders, wire brushes and acid or strong alkaline cleaners away from the surface. Graffiti, sealant residue and oil-based marks need a specialist product rather than a stronger mix of the everyday cleaner — test it on an off-cut first.
  • Set the cleaning interval to the site rather than to the panel. An exposed elevation in a city centre, near a coast or under trees collects grime far faster than a sheltered courtyard or an interior wall.
  • In bathrooms, kitchens and other wet areas, check the sealant lines, joints and penetrations at every maintenance round — water that gets behind the panel after washing is the one risk routine cleaning can introduce.

Technical Documents & Submittals

Document or data What it covers How to get it
Product data sheet Panel length and width, the thickness tiers, apparent density and moisture expansion for the stone-look series, in both exterior and interior use Ask your sales contact at enquiry stage
Fire performance documentation The tested wall build-up that applies to stone facade panels, with the thickness, substructure, joint and fixing conditions the result assumes Send your wall design so the document can be matched to it
Emissions documentation Formaldehyde and benzene not detected, and no toxic volatile organic compounds reported Request it for interior walls and handover files
Mould and moisture test documentation Board behaviour in humid and wet-area applications such as bathrooms, kitchens and balconies Request it together with the wet-area detail
Antiviral and radioactivity test documentation Where a healthcare, education or public project brief calls for them Say which tests your reviewer requires
Fabrication and fixing data Screw withdrawal results and the cutting, drilling, nailing and screwing operations used on site Request it with the fixing method for your wall
Surface and colour reference The stone finish approved for the project and the production reference held for repeat call-offs Confirmed by your sales contact
Project submission pack The documents a client, designer or authority reviewer has asked for, and which of them apply to your specification Send the reviewer's checklist and your sales contact will confirm what can be supplied
Physical sample A sample of the white marble stone face for approval and for the site file Ask your sales contact about availability
Contact for technical questions Thickness tier, surface, joint and fixing queries answered by the exterior wall panels factory that makes the board Raised through your sales contact

Scale & Supply Capability

CERSAIPANEL is the brand of Yulin Keli Keying Technology Co., Ltd., a building-material manufacturer established in 2016 and based in Yulin, Shaanxi, where we run our own production base with a workforce of 140. Manufacturing and export sit under one roof, so buyers in Europe, North and South America and Australia deal directly with the people who make the goods. Our full range is backed by third-party testing and the international certifications the company holds, and we take on OEM work and custom orders, from first sample through repeat production.

FAQ

Can stone facade panels be used on both exterior walls and interior walls?

Yes. The stone-look band is supplied for exterior wall cladding and for interior walls, and the same board is used indoors for ceilings, partitions, doors and cabinet fronts. Where the panel is going, and how it will be fixed there, decides the thickness tier and the fixing detail — tell us the wall position and we will confirm both.

How does the panel perform on an exterior wall in rain and wind?

The boards are made for exterior walls, and the tested wall system reports Class 5 air tightness, Class 3 water tightness and wind resistance of ±6.0 kPa. Those figures describe a complete stone facade panels exterior build-up, so the flashing, sealing and drainage details still have to be designed and installed for your wall — the panel performs as part of that assembly, not on its own.

How do I clean and maintain the stone-look face?

Routine cleaning keeps it looking new. The decorative surface is resistant to staining, scratching and wear, and normal washing removes dust and city grime; aggressive stains should be wiped off promptly rather than left to sit. On stone facade panels for exterior use, ordinary cleaning is usually all that is needed — there is no polishing cycle to plan for, and if a particular cleaner worries you, check it with us first.

Can the surface be produced to match a different stone sample?

Yes. Custom patterns can be produced with high-definition 3D printing and electron-beam curing, and because the surface is applied at our exterior wall panels factory rather than bought in, a specific marble or granite reference can be worked from a photograph or a physical sample. Send the reference with the wall position and we will confirm what can be matched.

Are the panels suitable for bathrooms, kitchens and balconies?

These are interior as well as exterior boards, and bathroom, kitchen and balcony walls all appear in the application list. As with any wet area, the detailing around the panel decides the outcome: edges, joints and penetrations still have to be sealed and finished properly, and that is the detail worth comparing when exterior wall cladding panels suppliers quote a bathroom wall.

Will the colour and pattern match between panels and across repeat orders?

The stone surface is produced to an approved sample, and that sample is the reference for the run: keep it on file and quote it on repeat orders so later batches are matched to the same finish. Panels are produced in batches, so a slight shift between any two batches is normal on a printed decorative surface; if a project is delivered in phases, say so at order stage so production can be planned around the phases.

Leave a message
姓名
电子邮件*
信息